Announcement

Collapse
No announcement yet.

Need some help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need some help

    Im About to reinstall the orignial headlight on my TLR.
    Going Fighter untill I get the HammerIt fairngs...
    (I crashed remember...)

    Problem is, I have never seen one without the fairings on...
    I got mine in a box...

    OK, to make it clear, I know how to install the headlignt, and the gauges shouldnt be a problem. But, everyting else?
    Lots of stuff hanging loose right now.
    I know that the fuses are supposed to be on the right, I have seens that in the manual...


    Does anyone have photos of how their love looks topless? ( )
    Up close photos would really be appreciated!
    Last edited by PutteLiten; 08-23-2003, 03:14 PM.
    TL1000R -99. Yellow/Black.
    M4 Full system(Alu), K&N Filter, TRE mod, removed Pair valve. Yoshimura clutch cover, removed Scissor gears, Carbon fibre hugger, carbon fibre rearhugger, HammerIt TLR/R fairings, Gilles Toolings rearset. Pazzo racing levers, shorties, Öhlins rear, Brembo front brakes, ET79 undertail, blah blah blah...
    ------------

  • #2
    Hello??

    Sure someone must have some pictures of thei TLR without farings??

    I was going to do this today, but I had a nice day on my Bulldog instead.

    Man, are the Tiller and the Bulldog different!!!
    Took a hour driving the Doggie before it felt "right". Then after the first brake, a coffie and some icecream, I was on it agian and this time we became one again. Soo sweet when it happens.
    Can´t honestly say that the Bulldog is as fun as the TL, is damn fun, no doubt about that! But something is missing? I think the difference is that Im never affraid on it, on the TL, it happens...
    The Bulldog is easy to ride, tho the original engine is plain booring. My 81rear wheel hp and 106nm (on the wheel) is MUCH better.

    But, this post was about the Tiller, give me those pictures!!! (plz...)
    TL1000R -99. Yellow/Black.
    M4 Full system(Alu), K&N Filter, TRE mod, removed Pair valve. Yoshimura clutch cover, removed Scissor gears, Carbon fibre hugger, carbon fibre rearhugger, HammerIt TLR/R fairings, Gilles Toolings rearset. Pazzo racing levers, shorties, Öhlins rear, Brembo front brakes, ET79 undertail, blah blah blah...
    ------------

    Comment


    • #3
      Sorry bro I dont have a pic. But its pretty straight forward. The fuses attach to the right side ram air. Without the fairing on you cant attach it. I would just zip tie it to the fairing stay or something. Just start putting everything on and you'll get it.

      My site.
      www.tacoma.gixxer.com

      Comment


      • #4
        Ok, I´ll be on it tomorrow.

        Think all I really needed was someone saying those words.
        Just start putting everything on and you'll get it

        Dont want to strip it down and get stuck with an undrivable bike.

        Thanks!
        Last edited by PutteLiten; 08-24-2003, 03:42 PM.
        TL1000R -99. Yellow/Black.
        M4 Full system(Alu), K&N Filter, TRE mod, removed Pair valve. Yoshimura clutch cover, removed Scissor gears, Carbon fibre hugger, carbon fibre rearhugger, HammerIt TLR/R fairings, Gilles Toolings rearset. Pazzo racing levers, shorties, Öhlins rear, Brembo front brakes, ET79 undertail, blah blah blah...
        ------------

        Comment


        • #5
          Trust me, if you want it bad enough you can do it!!! Ive taken it apart many times and theres nothing that would stop you from riding, its pretty basic. Just trying to help

          My site.
          www.tacoma.gixxer.com

          Comment


          • #6
            I trust you!

            Even though Im no whiz in the garage, I guess I cant screw this up.

            I manage to switch subframe all by myself a while ago.
            I was so easy I laught at my worries afterward.
            TL1000R -99. Yellow/Black.
            M4 Full system(Alu), K&N Filter, TRE mod, removed Pair valve. Yoshimura clutch cover, removed Scissor gears, Carbon fibre hugger, carbon fibre rearhugger, HammerIt TLR/R fairings, Gilles Toolings rearset. Pazzo racing levers, shorties, Öhlins rear, Brembo front brakes, ET79 undertail, blah blah blah...
            ------------

            Comment


            • #7
              Yeah sometimes its just a matter of doing it. I worried forever about putting this 03 R1 togeather from scratch. I'd never even seen a R1 up close. Turns out once i got in and go my hands durty it was no problem at all! You can do it!

              My site.
              www.tacoma.gixxer.com

              Comment


              • #8
                Yeah I can imagine it couldnt have been the easiest work. Putting together a bike you only have seen in the mirrors before...




                Going to be fun to se how your project turns out.
                TL1000R -99. Yellow/Black.
                M4 Full system(Alu), K&N Filter, TRE mod, removed Pair valve. Yoshimura clutch cover, removed Scissor gears, Carbon fibre hugger, carbon fibre rearhugger, HammerIt TLR/R fairings, Gilles Toolings rearset. Pazzo racing levers, shorties, Öhlins rear, Brembo front brakes, ET79 undertail, blah blah blah...
                ------------

                Comment


                • #9
                  So PL how is it going ? Done yet and ofcourse
                  Originally posted by TLCURT
                  Because TL's fucking rock.

                  It's a cult thing...to own one is to love one.

                  Comment


                  • #10
                    Originally posted by tl1000lasse
                    So PL how is it going ? Done yet and ofcourse
                    Bad bad bad day at work.

                    Didn´t have the inspiration to do it today.

                    If I get my hand at the one writing that Blaster virus Im personally going to ripp his head of, boil it slowly, swamp it with honey and reattach it to his body at the local Behive...

                    TL1000R -99. Yellow/Black.
                    M4 Full system(Alu), K&N Filter, TRE mod, removed Pair valve. Yoshimura clutch cover, removed Scissor gears, Carbon fibre hugger, carbon fibre rearhugger, HammerIt TLR/R fairings, Gilles Toolings rearset. Pazzo racing levers, shorties, Öhlins rear, Brembo front brakes, ET79 undertail, blah blah blah...
                    ------------

                    Comment


                    • #11
                      It´s done.

                      Phue, damn that wasn´t as easy that I had thought.
                      It was much easier to switch subframe.

                      THE problem was, where to put all thos wires?? I dont have any fairings to hide them in. And the fusebox, well.
                      it´s righ under the rev-gauge...

                      Looks like shit. But, it works, thats the important thing.

                      Tho, I think my headlight could do extra time searching for lost aircrafts...
                      and, that even without doing wheelies...

                      Next time it will be so much easier, and faster.

                      I´ll se if I can get hold of a digital camera.
                      TL1000R -99. Yellow/Black.
                      M4 Full system(Alu), K&N Filter, TRE mod, removed Pair valve. Yoshimura clutch cover, removed Scissor gears, Carbon fibre hugger, carbon fibre rearhugger, HammerIt TLR/R fairings, Gilles Toolings rearset. Pazzo racing levers, shorties, Öhlins rear, Brembo front brakes, ET79 undertail, blah blah blah...
                      ------------

                      Comment


                      • #12
                        I'm here with pics


                        Looks like I'm a little late

                        Nice work PL
                        TLOTM:
                        May 2003
                        August 2004

                        Comment


                        • #13
                          Originally posted by SDTLR
                          I'm here with pics


                          Looks like I'm a little late

                          Nice work PL

                          Not late!!!

                          I still want to know how it REALLY should look like.

                          I guess the previous owner have done som mods, and I don´t know how it is supposed to look stock...
                          TL1000R -99. Yellow/Black.
                          M4 Full system(Alu), K&N Filter, TRE mod, removed Pair valve. Yoshimura clutch cover, removed Scissor gears, Carbon fibre hugger, carbon fibre rearhugger, HammerIt TLR/R fairings, Gilles Toolings rearset. Pazzo racing levers, shorties, Öhlins rear, Brembo front brakes, ET79 undertail, blah blah blah...
                          ------------

                          Comment


                          • #14
                            so, it wasnt that bad was it PL?

                            Comment


                            • #15
                              Well, depends on how you see it.. .

                              It did take me longer than I had anticipated.
                              I ran into the problem I thought I would run into. Tho, I couldnt solve it the way I had first thought about. I couldnt strear left that way...

                              If I only had had fairings it would probably have been easier. I just couldnt find a good way to hide away the cables. Cant have them hanging...
                              Solved it really ugly, silbertape (gaffatape, or whatever it is called...). Going to get me som black gaffa tape tomorrow...

                              Oh well. Hope Oz is working on those fairings...
                              TL1000R -99. Yellow/Black.
                              M4 Full system(Alu), K&N Filter, TRE mod, removed Pair valve. Yoshimura clutch cover, removed Scissor gears, Carbon fibre hugger, carbon fibre rearhugger, HammerIt TLR/R fairings, Gilles Toolings rearset. Pazzo racing levers, shorties, Öhlins rear, Brembo front brakes, ET79 undertail, blah blah blah...
                              ------------

                              Comment

                              Working...
                              X