need nut sizes for swingarm and rear axle bolt

[Stabber Evil Twin Find all posts View Profile Close Stabber]

I have everything removed except the swingarm bolt. I made a special tool for the notched part but I dont have a socket big enough for the other side I used a crecent wrech to remove the axle bolt but want to use my torque wrench with socket to put it back on

[Steve TLS Thunder from downunder Find all posts View Profile Close Steve TLS]

36mm for the axle nut.

Swingarm :dunno

[kevh Davcruz made me do it!! Find all posts View Profile Close kevh]

Re: need nut sizes for swingarm and rear axle bolt

Originally posted by Stabber
I have everything removed except the swingarm bolt. I made a special tool for the notched part but I dont have a socket big enough for the other side I used a crecent wrech to remove the axle bolt but want to use my torque wrench with socket to put it back on

can you post a pic or explain the tool you made? i was just looking at this tonight.

thx

[Steve TLS Thunder from downunder Find all posts View Profile Close Steve TLS]

Here you go Kev, pulled from here http://www.komotodraggin.com/swingarm.html

Get the hacksaw and grinder onto the right sized socket and you're set!

[kevh Davcruz made me do it!! Find all posts View Profile Close kevh]

ahhh, so you just cut down a socket and left the 4 "teeth". cool thx

[Stabber Evil Twin Find all posts View Profile Close Stabber]

This is the one I made. Does anyone know what size the other swingarm nut are