Announcement

Collapse
No announcement yet.

throttle body sync

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • throttle body sync

    Wow, the throttle is so much smoother now. I not only set my TPS last night, but also sync'd my throttle bodys with a mercury gauge at work.

    I'm stoked, now I can't wait to go to the playground tonight and really try it out.

    I'll try and get some pics while I'm down there.
    2000 TLS, bahama blue with guard rail mods, ProTek rearsets, Yosh Slipons, PCIII

    2001 DRZ 400E M4 full system, Nstyle graphics, 320mm front rotor/17inch spoked rims on the way. Damn shipping

  • #2
    Were your TB's out by much? I always check mine and have fiddled with it twice, but they were never that far out. Now the TPS.........
    "I spent most of my money on Scotch, women and cigarettes. The rest I just wasted"

    Comment


    • #3
      yeah, they were a ways off, havn't ever done it to the bike, and probably hasn't been done in the 3 years the bikes been on the road.

      I had to do it to my SV a few times too.

      Next comes plugs/oil again next week.

      I'll start blacking the frame out then too.
      2000 TLS, bahama blue with guard rail mods, ProTek rearsets, Yosh Slipons, PCIII

      2001 DRZ 400E M4 full system, Nstyle graphics, 320mm front rotor/17inch spoked rims on the way. Damn shipping

      Comment


      • #4
        i really should do the TB sync...i'm sure they're way off!

        any help on that sync tool? duken?

        -

        Comment


        • #5
          I just bought a "carbtune II" for vacuum synching duties.. Works REALLY well and no Mercury lying around the house.. It uses steel rods in their place. Very cool.. You have to order it from the UK though and it takes about a week..

          http://www.carbtune.com/
          I've got a huge penis, You've got a huge penis, even Tim over there, yup you guessed it, huge penis. Good, now that that's out of the way, let's go ride

          Comment


          • #6
            Bill
            "I spent most of my money on Scotch, women and cigarettes. The rest I just wasted"

            Comment


            • #7
              Doug Makes a Run at Bill (Not In a Gay Way, Mind You!)

              Bill,

              I'll see your "carbtune II" and raise you one Genuine, Suzuki Carbureter Balancer, Suzuki Part Number 09913-13121. No mercury, and it is a major tool. I had to have it and I so need time to play with it. Soon, i should be getting back to bike stuff, this job thing has sucked.



              Comment


              • #8
                TLRDoug

                Comment


                • #9


                  -

                  Comment


                  • #10
                    Now, not to cast disperssions on Doug's fine gauges, but I saw a set of digital balancing gauges (LCD screen) at the local dealership that were definately Bling Bling. The price? $800 Cnd. .... .... .... I think I'll keep feeding mercury to my paltry $80 sticks.
                    Doc

                    Geez my bike sounds funny now

                    Comment


                    • #11
                      Doug-if you don't mind, how much did that set you back?

                      Comment


                      • #12
                        But Doug, I thought you liked me in a prison inmate kinda way...

                        I checked out the Suzuki tool, but it was about $200. The Carbtune shipped was around $90 and comes with the 5/6mm adapters..

                        The Suzuki is major though! That's what I wanted, but couldn't justify double the $$
                        I've got a huge penis, You've got a huge penis, even Tim over there, yup you guessed it, huge penis. Good, now that that's out of the way, let's go ride

                        Comment


                        • #13
                          I am contemplating the 'Twinmax', also no mercury. Anyone have experiance/heard about it? The guy at my local Cycle Gear swears buy it.

                          Check it out at www.adventuremotogear.com
                          I've crashed both, and hurt myself worse on bicycles then I have on motorcyles!

                          Comment


                          • #14
                            $178.00, it is about the same from Ron Ayers ($178.85) but that is also plus shipping. I have synched three sets now, so it is almost paid for. I should do my own bike! Duh! Someday I will learn to get money for this stuff......I am such a dumbass....

                            Comment


                            • #15
                              Originally posted by Tonyd
                              I am contemplating the 'Twinmax', also no mercury. Anyone have experiance/heard about it? The guy at my local Cycle Gear swears buy it.

                              Check it out at www.adventuremotogear.com
                              Looks cool, but I still have an I-4 in the garage, so I need the 4 sticks.. I'll have to read up on it more though.. I am a tool whore...
                              I've got a huge penis, You've got a huge penis, even Tim over there, yup you guessed it, huge penis. Good, now that that's out of the way, let's go ride

                              Comment

                              Working...
                              X