Tweet
I ordered a part from a forum user and I have yet to recieve it. I e-mail him two days ago and I have not gotten a response. I bought my part over two weeks ago and I want it shipped. I want him to see this and reply or send my part. I know he'll see this because he was just here a few hours ago. I would rather not leave negative feedback unless I have to. Please ship my part.
-
-
Bump -
That sux
My site.
www.tacoma.gixxer.comComment
-
sux man...luckily we have relatively little problems on the board with ppl jacking other members...but still its a
hey if its SDTLR, we can just go get the boys and kick his
ass 
-
Comment
-
Government policy
NAME & SHAME
so no one else makes the same mistake
A pat on the back is only a few centimetres from a kick in the butt
Comment
-
Lil' bump...
Jim Miller
Appalachian Signs & Graphics
* For All Your Sportbike And Racing Decal Needs *
Phone: 717-979-2814
www.appalachian-signs.com
[email protected]Comment
-
wasn't me
TLOTM:
May 2003
August 2004Comment
-
And
for crash
why would you even mention my name in this thread
TLOTM:
May 2003
August 2004Comment
-
PM me a name.
We have had an issue with ONE person and have removed them from the board for this exact problem. If it is the same person, I'll let you know and you will have to seek other means of communication with him.Comment
-
Totally crappy!
I can understand when sh!t happens...but communication is very important when something comes up. Let's give the benefit of the doubt, and hope 'Mr. X' has just run into a temporary snag.
'Yo...Mr. X! Either send out the goods, or at least send an email explaining what is going on!!'
I am relatively new to this board, and have already bought some things from other members...things always went smoothly!!Be good, and if you can't be good...be really, REALLY bad!!
TusherTLR
gear:
Arai Okada replica; Joe Rocket GPX gloves; Joe Rocket Ballistic & Joe Rocket Ballistic mesh jackets
stuff:
D&D boltons; TFI; K&N air filter; JSD Switchable TRE; EBC HH pads; BT010's; front and rear flushmounts; 16t front Sprocket Specialist; manual fan switch; 3/4" lift kit
Soon (well...maybe not too soon):
Joe V mod, Pair valve removalComment
-
ps...what does 'bump' mean?Be good, and if you can't be good...be really, REALLY bad!!
TusherTLR
gear:
Arai Okada replica; Joe Rocket GPX gloves; Joe Rocket Ballistic & Joe Rocket Ballistic mesh jackets
stuff:
D&D boltons; TFI; K&N air filter; JSD Switchable TRE; EBC HH pads; BT010's; front and rear flushmounts; 16t front Sprocket Specialist; manual fan switch; 3/4" lift kit
Soon (well...maybe not too soon):
Joe V mod, Pair valve removalComment
-
Shorthand for:Originally posted by TusherTLR
ps...what does 'bump' mean?
"No one has replied to my thread in a while, so I want to BUMP it back to the top for more exposure"Comment
-
Originally posted by TusherTLR
ps...what does 'bump' mean?
a "bump" just gets the thread some action and brought back to the top of the page. people are more likely to see a thread if its on the first page and near the top
2002 TLR B/W. Yoshimura bolt on Titanium cans. Yosh box remap. Joe V airbox mod. plug in TRE. 17/41 sprockets. Zero Gravity double bubble screen. 
fan switch. HyperPro steering damper. Extreme Graphic Top Gun undertail. Ohlins rear shock.
Gear: Arai Quantum f. Joe Rocket GPX 1pc suit. Alpinestars Super Tech boots. Alpinestars GP-1 gloves----always wear it all
<a href="http://www.wunderground.com/US/CA/San_Ramon.html">
<img src="http://banners.wunderground.com/bannerComment
-
So, who was it? We can't have one of the TL bretheren pulling this crap
SOLD! 2002 Suzuki TL1000R - Blue/White
Two Brothers Exhaust - YAFMS Remap - Ohlins Rear Shock - FSMD Undertail - Rear Hugger - No-Cut Frame Sliders - Custom Airbrushed Solo Tail Cowl
Comment
-
I've had two experiences with board members (SDTLR, BradGA) with no problems at all
I wonder who would do such a thing
RIP - The Pig (Stolen July 2006)
Comment
Comment