No announcement yet.

Power Commander II

  • Filter
  • Time
  • Show
Clear All
new posts

  • Power Commander II

    Iam going to buy a PCII for my 03 TLR. Looking at there website there is no map for a Full Ti Yosh system with stock Air cleaner.
    I see there is one for M4 ex.
    any suggestions.

  • #2
    go with the one that closest to what you have ,if you dont like it just reset and keep trying untill you are happy with the performance.but your best bet is to get it tuned at a qualified center cause every bike is different
    MY MODS:
    Ackrapovic Evo II full exhaust Head Work,Flowed injectors,Port /Polish exh and intake.cams,subframe,projector headlights,gap mod,Undertray,air/oil breather,pair valve removal,black frame Earth grounding mod . Dynojet PowercommanderII: (Custom Map by Orient Express):Galfer Wave Rotors Front & Rear: Pyramid Hugger:GSXR1k rear brake:A.T.R.E,Galfer Steel braided lines Front & Rear:TLS Cable Clutch Conversion:Woodcraft clipons:Vortex top triple clamp: DID Erv2 gold 520 conversion: Spocket Specialist Titan Tough Sprocket 17/41:GSXR tail: Nocut Frame Sliders:Air Tech Black Chrome Windscreen:LP Carbon Mirrors:Raised Tail 3/4" Ohlins Steering Damper:BRG 1/5 Throttle:GP Tech Fairing Bracket: Clear Alternative tail light:Black rims, ProTeck rearsets.gixxer 1k fender.Bitubo shock,custom projector headlights Race plastics and air tubes by AK composite 3/4 tail rasier custom made by TLDV8
    Going For 440 wet weight.136 +HP. 72 +TQ



    • #3

      But I'm sure some guys around heer have a map fitted for the Yosh system...
      If You're Not Living On The Edge, You're Taking Up Too Much Space

      Show Mods: HammerIt TLR/R Fairing, Tail and Undertail, Hugger and Fender * Custom


      • #4
        get a K&N air filter...then set it. I am sure that there is enough info/maps for that setup!
        Be good, and if you can't be really, REALLY bad!!


        Arai Okada replica; Joe Rocket GPX gloves; Joe Rocket Ballistic & Joe Rocket Ballistic mesh jackets
        D&D boltons; TFI; K&N air filter; JSD Switchable TRE; EBC HH pads; BT010's; front and rear flushmounts; 16t front Sprocket Specialist; manual fan switch; 3/4" lift kit
        Soon (well...maybe not too soon):
        Joe V mod, Pair valve removal


        • #5
          ok, with a K&N airfilter and Yosh system where can I get a map for this. Can anyone send me a good map?