Announcement

Collapse
No announcement yet.

Master Cylinder

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Master Cylinder

    Hey, I just received a "new" brake setup off of a guy on ebay and I don't think it has the correct master cylinder attached. The calipers are six-pots so i need the 5/8 MC...how do i check to make sure?

    thinking I've been taken,
    dave

    Leo Vince F/S? K&N filter PCII Switchable TRE Goodridge SS lines w/ six pots Extreme Graphics Undertail Pyramid Hugger Coerce Sprocket Cover
    Tags: None
  • #2
    Re: Master Cylinder

    Originally posted by delong31
    Hey, I just received a "new" brake setup off of a guy on ebay and I don't think it has the correct master cylinder attached. The calipers are six-pots so i need the 5/8 MC...how do i check to make sure?

    thinking I've been taken,
    dave
    It will have a 5/8 on the cylinder if you have the correct one (14 if you don't)...
    Just a few mods:

    Silver, the fastest color!

    On the inside - HID type bulbs, K&N filter, Iridium ix plugs, 16T front sprocket, Coerce billet sprocket cover, Yosh re-map +5, +5, +5 11 o'clock, Scorpio SE-i500 system from my GB and an ATRE.

    On the outside - TLR forks, front carbon fender, 5/8th master brake cylinder, black SS brake lines (frnt & rear), braking waves all around with Ti bolts, Brembo gold front calipers & a busa gold rear caliper, flush mount signals (frnt & rear), ZG DB scr

    Comment

    • #3


      5/8 is cast on the mc body.
      "I spent most of my money on Scotch, women and cigarettes. The rest I just wasted"

      Comment

      • #4
        Hey thanks...I found it...I was looking on the resevoir like an idiot
        Another question, are the parts interchangable from my tillis(resevoir, bolts etc) with the bigger MC? The whole setup i bought isn't in the best of shape , so I was wondering if i could swap out just the MC with the brake setup off of my tillis? does that make sense? I'm not with my bike right now, so i can't go out and compare.
        Thanks for the help

        Leo Vince F/S? K&N filter PCII Switchable TRE Goodridge SS lines w/ six pots Extreme Graphics Undertail Pyramid Hugger Coerce Sprocket Cover

        Comment

        • #5
          I did.

          I bought a stock TLR setup, it was still closed up.

          I used the TLR MC and Calipers, my TLS lines and banjo's and the bracket that holds the TLS reservoir on. You can swap the reservoirs over no problem.

          I did mount the reservoir with the TLR bracket but it holds it on a funny angle. So it was just a matter of swapping back to the TLS bracket.
          "I spent most of my money on Scotch, women and cigarettes. The rest I just wasted"

          Comment

          • #6
            So you just had the TLR calipers and MC and then the rest was all TLS?

            Leo Vince F/S? K&N filter PCII Switchable TRE Goodridge SS lines w/ six pots Extreme Graphics Undertail Pyramid Hugger Coerce Sprocket Cover

            Comment

            • #7
              Yep, that's it!
              "I spent most of my money on Scotch, women and cigarettes. The rest I just wasted"

              Comment

              • #8
                Sweet, thanks for the help!

                Leo Vince F/S? K&N filter PCII Switchable TRE Goodridge SS lines w/ six pots Extreme Graphics Undertail Pyramid Hugger Coerce Sprocket Cover

                Comment

                • #9
                  I used the TLR MC and Calipers and lines but took the reservoir bracket from the TLS reservoir and put it on the TLR reservoir so no funny angles here
                  Originally posted by TLCURT
                  Because TL's fucking rock.

                  It's a cult thing...to own one is to love one.

                  Comment

                  Previous template Next
                  Working...
                  X