Tweet
As in not working like HORKN's!
Where should I start? Any ideas?
Thanks!!!!
Where should I start? Any ideas?
Thanks!!!!
-
-
Check the pick up the countershaft sprocket cover and the trigger on the countershaft itself -
Originally posted by Ryno
Check the pick up the countershaft sprocket cover and the trigger on the countershaft itself
An you should be able to Ohm out the speedo itself to see if that is your problem.
Comment
-
mine works just fine.
Comment
-
plug it back in:dunnoTLOTM:
May 2003
August 2004Comment
-
yes, check your wiring harnessComment
-
Did you ever have any problems with the speedo on your TLS
enough said...
Just a few mods:
Silver, the fastest color!
On the inside - HID type bulbs, K&N filter, Iridium ix plugs, 16T front sprocket, Coerce billet sprocket cover, Yosh re-map +5, +5, +5 11 o'clock, Scorpio SE-i500 system from my GB and an ATRE.
On the outside - TLR forks, front carbon fender, 5/8th master brake cylinder, black SS brake lines (frnt & rear), braking waves all around with Ti bolts, Brembo gold front calipers & a busa gold rear caliper, flush mount signals (frnt & rear), ZG DB scrComment
-
nope, nothing was ever wrong on my TLS. The wiring harness is plugged in to where the line from the counter shaft meets at the motor connection area. I haven't check the counter shaft just yet. Sounds like something to do tomorrow while it's raining!Comment
Comment