Announcement

Collapse
No announcement yet.

Who knows about Ohlins?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Who knows about Ohlins?

    Looking at redoing the rear shock eventually, but dont see the purpose if I cant have ride height adjustment as well.
    The recommneded Ohlins for the TLR is the 46PRC, no ride height adjustment.
    So does anyone know which 46prcl or even better 46 prcls would fit the TLR? The remote preload adjuter is sweet!

    Does anyone know if the Lindemann Penske has ride height adjustment. I loved my penske on my cbr, infinitely adjustable so you could get it all just right.

    Thanks
    Nate

    Galfer SS lines, LE reworked forks and Penske rear, IRP axle spacer, frame sliders and rear spools, custom airbox, block off plates by MFR Inc., custom undertray, Extreme Graphics Top Gun undertail w/ Navy's dimmer, ZG DB dark, Scott's steering damper, Yosh bolties, PC2, DID 520ERV2, 17 SS & 41 AFAM, Galfer rear wave and other stuff to come!
    Tags: None
  • #2
    from what others have said the Penske is the only one that is ride height adujustable for the TLR
    2002 TLR B/W . Yoshimura bolt on Titanium cans. Yosh box remap. Joe V airbox mod. plug in TRE. 17/41 sprockets. Zero Gravity double bubble screen. fan switch. HyperPro steering damper. Extreme Graphic Top Gun undertail. Ohlins rear shock.

    Gear: Arai Quantum f. Joe Rocket GPX 1pc suit. Alpinestars Super Tech boots. Alpinestars GP-1 gloves----always wear it all

    <a href="http://www.wunderground.com/US/CA/San_Ramon.html">
    <img src="http://banners.wunderground.com/banner

    Comment

    • #3
      Ohlins will give you a 10mm longer shaft (on the shock)if you ask them to


      Or buy a Penske:dunno
      TLOTM:
      May 2003
      August 2004

      Comment

      • #4
        Wilburs have rid hight adjustment too, I think - J-Bone or TLRR should know, TLRR has one and J-Bone is about to buy one.

        They are as good as the Öhlins, and a bit cheaper.

        And, the 46prcl should fit the TLR. It is the same shock, except for that little ride adjustment piece we all want...
        TL1000R -99. Yellow/Black.
        M4 Full system(Alu), K&N Filter, TRE mod, removed Pair valve. Yoshimura clutch cover, removed Scissor gears, Carbon fibre hugger, carbon fibre rearhugger, HammerIt TLR/R fairings, Gilles Toolings rearset. Pazzo racing levers, shorties, Öhlins rear, Brembo front brakes, ET79 undertail, blah blah blah...
        ------------

        Comment

        • #5
          SD,
          You if they put a 10mm longer shaft, does that change the travel at all, or just lenghten the rod for the ride height. I still think that I want a fully adjustable ride ht., like the prcl or penske.

          Anyone positive that the Lindemann penske has ride ht. adjust.
          Maybe Ill just email Lindemann and find out myself.
          Nate

          Galfer SS lines, LE reworked forks and Penske rear, IRP axle spacer, frame sliders and rear spools, custom airbox, block off plates by MFR Inc., custom undertray, Extreme Graphics Top Gun undertail w/ Navy's dimmer, ZG DB dark, Scott's steering damper, Yosh bolties, PC2, DID 520ERV2, 17 SS & 41 AFAM, Galfer rear wave and other stuff to come!

          Comment

          • #6
            it only raises the rear there is no adjustability.
            TLOTM:
            May 2003
            August 2004

            Comment

            • #7
              Just got an email back form lindemann, and there kit does not have ride height adjustablility, but is 10mm longer then stock when you bolt in. You can also use the shim spacers that are made for gsxr to change them if you want more or less.
              Unfortunately it is not as easy as a typical penske is, just turn to nuts and your done. With this you need to pull off the rear (or at least loosen very well) and remove stock strut mount for less than 10mm, or add spacers to stock mount to add.
              That ohlins with ride height adjustment is looking better
              Nate

              Galfer SS lines, LE reworked forks and Penske rear, IRP axle spacer, frame sliders and rear spools, custom airbox, block off plates by MFR Inc., custom undertray, Extreme Graphics Top Gun undertail w/ Navy's dimmer, ZG DB dark, Scott's steering damper, Yosh bolties, PC2, DID 520ERV2, 17 SS & 41 AFAM, Galfer rear wave and other stuff to come!

              Comment

              • #8
                I sent you photos of how the ohlins fits the TLR last night didn't you get them?
                How much does the ohlins change the ride height compared to a stock rotary set-up? Anyone Anyone?
                No More TLR

                Comment

                • #9
                  mount photo

                  here is the photo of the mounted Ohlins
                  No More TLR

                  Comment

                  Previous template Next
                  Working...
                  X