new blinkers...
my own Rear integrated Light system..
these are Billet aluminum LED's for GSXR 1000 made by watsen design in Canada..
THey're handmade, and take a while to get.. but the price can't be beat, and they kick ass..
<img src ="http://www.miahdesign.com/tls_pics/Blinkers/DSC00074.JPG">
<img src ="http://www.miahdesign.com/tls_pics/Blinkers/DSC00075.JPG">
<img src ="http://www.miahdesign.com/tls_pics/Blinkers/DSC00076.JPG">
this is the mounting screw.. but I'm gonna run a longer bolt and nut throught the lens cover/through the blinker, and then throught he base..
<img src ="http://www.miahdesign.com/tls_pics/Blinkers/DSC00081.JPG">
Before...
<img src ="http://www.miahdesign.com/tls_pics/Blinkers/DSC00078.JPG">
I cut off the original mounting posts.. and made a spot to run the screw that holds the cover on through the blinker..
<img src ="http://www.miahdesign.com/tls_pics/Blinkers/DSC00079.JPG">
And and extra little hole to run the wires through..
<img src ="http://www.miahdesign.com/tls_pics/Blinkers/DSC00080.JPG">
the blinker is the new mounting point..
<img src ="http://www.miahdesign.com/tls_pics/Blinkers/DSC00077.JPG">
I didn't want the lens to smash the LED's so I made some spacers out of one of some Lamp hardware..
<img src ="http://www.miahdesign.com/tls_pics/Blinkers/DSC00082.JPG">
<img src ="http://www.miahdesign.com/tls_pics/Blinkers/DSC00083.JPG">
Almost there
<img src ="http://www.miahdesign.com/tls_pics/Blinkers/DSC00084.JPG">
rear mounting point..
<img src ="http://www.miahdesign.com/tls_pics/Blinkers/DSC00085.JPG">
<img src ="http://www.miahdesign.com/tls_pics/Blinkers/DSC00086.JPG">
<img src ="http://www.miahdesign.com/tls_pics/Blinkers/DSC00087.JPG">
DONE!!!
<img src ="http://www.miahdesign.com/tls_pics/Blinkers/DSC00089.JPG">
Comment