Announcement

Collapse
No announcement yet.

What LP flushmounts fits the best on TLS front

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • What LP flushmounts fits the best on TLS front

    What LP flushmounts fits the best on the TLS front. I noticed they come in different sizes and I want the smallest ones possible. Do you have to cut the stock plastic to get them to fit? Any help and any pics would be helpful. Thanks for any help
    Everyone dies but not everyone lives

  • #2
    i want to know the same, but mini stalks for me. i know a wile back there was a thread on this. going to the bike shop to get some short stalks today. finally got mega sick of the stock mega signals....

    Comment


    • #3
      I got the small LP#122-9735 and the medium size also. What I found is the small seem to be rounded just right so that with perfect placement they just do cover the hole. The mediums actually cover it with room to spare, but they are so long they look funny IMO.

      Here is what they look like

      Comment


      • #4
        i like those flushmounts. look really nice, but i would want those signal mirrors if i went that route.

        Comment


        • #5
          David did you have to cut away any plastic to make them fit and look that good cause they look like they were made for you
          Originally posted by TLCURT
          Because TL's fucking rock.

          It's a cult thing...to own one is to love one.

          Comment


          • #6
            Buy adapters!

            I got me come of these

            http://www.motrax.co.uk/Index_pages/...microarrow.htm

            Micro-Arrow stalks in fake carbon. (Fake carbon came with the bike.. I can fight it or go with it.. so I'm going with it...)

            Remeber for ALL turnsignal changes buy the Lockhart ADAPTERS so you don't have to cut your wiring harness. For the Suzuki TL's we need the "single filament" adapter front and back. It's the one in the middle!

            http://www.lockhartphillipsusa.com/p...ub3.asp?id=139
            I've got a huge penis, You've got a huge penis, even Tim over there, yup you guessed it, huge penis. Good, now that that's out of the way, let's go ride

            Comment


            • #7
              Originally posted by tl1000lasse
              David did you have to cut away any plastic to make them fit and look that good cause they look like they were made for you
              Not on the hole itself, but I did use a dremel and sanding drum and smooth the back area down flush.

              Comment


              • #8
                I bought a set of the flushmounts and turned the idea down after finding I had to gring the back of the fairing down.. (It was still WAY to new to take a grinder too!)

                I'm using them on project Ninja.. They do look cool though!
                I've got a huge penis, You've got a huge penis, even Tim over there, yup you guessed it, huge penis. Good, now that that's out of the way, let's go ride

                Comment


                • #9
                  Thanks for the help. I;m going to get me some of the small LP ones. Those look really good on your bike Dave. I like those motrax ones for the rear Bill where did you order those? I've seen some other brand like that I really dont like the tiny oval kind my buddy has them on his Gixxer. They are really hard to see and stick out to far IMHO.
                  Everyone dies but not everyone lives

                  Comment


                  • #10
                    I did the same thing, grind the backing down. I just sold all my blinkers. I had the holes filled at the paint shop. Am going to something else this time.

                    Comment


                    • #11
                      I went wiht the LP iridium short stalks.
                      Last edited by tl1000s; 08-03-2003, 10:47 PM.

                      Comment


                      • #12
                        Another view
                        Last edited by tl1000s; 08-03-2003, 10:46 PM.

                        Comment


                        • #13
                          one more
                          Last edited by tl1000s; 08-03-2003, 10:45 PM.

                          Comment


                          • #14
                            Originally posted by tl1000s
                            one more
                            Isn't that the same view as the previous one?

                            Comment


                            • #15
                              I've got the "V"s for the rear (yet to be installed, getting a friend to do a plate/signal mount) and have been looking at options for the front, either the small flush or the same "V" as the rear
                              1

                              Comment

                              Working...
                              X