Attn: Jim Brewer

[Guest]

or anyone else with a brembo MC....what size banjo does it use? same as stock for a TLR?

btw, does anyone know the banjo size for stock ducati 900ss calipers?

thanx guys!

-

[Jim Brewer]

Re: Attn: Jim Brewer

Originally posted by crashtd
or anyone else with a brembo MC....what size banjo does it use? same as stock for a TLR?

The stock TLR is a 10x1.25mm and the Brembo is a 10x1.0mm. It's the same diameter, just a finer thread.

[Guest]

so i won't need to buy new lines?
just a new bolt? i take it brembo provides that

-

[Jim Brewer]

Originally posted by crashtd
so i won't need to buy new lines?
just a new bolt? i take it brembo provides that

Ohh... well, depending on what you have for lines, you might or might not. The brambo banjo bolts into the bottom of the m/c whereas the stocker bolts onto the end ...

If you have dual lines with a straight to 45deg banjo, you should be ok. If you have 45-90deg banjos, it might work. I don't think stock lines would work .. but I'm not sure.

Let me know if you need a picture and I'll try to get one up in a couple of hours (I'm going to dinner now).

My Brembo m/c didn't come with the bolt .. but my Galfer lines did.

[Guest]

hmm...well i'm getting new galfer lines to replace the ones i just sold. I'm just trying to figure out if i need new sizes or not. The SS that are on there now bolted up to my brembo calipers just fine, but i didn't know if the MC was gonna be different. I'm running the galfer "race" setup. 45's at the caliper, and straights on the MC.

Pictures would be nice

thanx man!

-

[Jim Brewer]

Originally posted by crashtd
I'm running the galfer "race" setup. 45's at the caliper, and straights on the MC.

Hmm... I'm using 45s on the mc and 90s on the calipers. I think either will work. Here are some pictures (sorry they're not better, but I think you'll see what I'm doing)







Let me know if you need better pictures. I do think the straights/45s you're talking about will work fine.

[Guest]

solid...i like your taste in calipers
looks like it should work out...i was mostly concerned with banjo size...i really wanted the galfer straight-in lines they just came out with, but apparently they're not giving the love to the brembos

btw, do i need to take my fluid res. off my stock MC form my brembo? I don't recall if it comes with the brembo or not

thanx again man

-

[Jim Brewer]

Originally posted by crashtd
btw, do i need to take my fluid res. off my stock MC form my brembo? I don't recall if it comes with the brembo or not

Mine didn't come with a remote reservoir, so I had to make a mount for the stock one. I know some Brembo m/c's come with a reservoir .. and maybe you can use it with stock bars .. I don't remember.

[Guest]

ok thanx...i guess i'll have to wait and see

-