Announcement

Collapse
No announcement yet.

TLS Engine Covers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • TLS Engine Covers

    any know of a manufacturer for billet aluminun engine case covers for a TLS? be a nice piece of mind for those track days

    thx

    2000 tillis plus stuff with some polished stuff and some carbon fiber stuff and a little bit of tlr stuff and some gsxr stuff

    CLICK HERE to donate a couple dollars/rubles/won/yen/euro/pounds/francs/etc to the greatest forum on the web!
    "Aerodynamics are for those who fail to make HORSEPOWER!"
    -Enzo Ferrari-

  • #2
    Graves Motorsports makes or at least used to make one. Yoshimura used to, but not anymore. NRC is another brand to check, but I don't know if they make that application.
    It may be that your sole purpose in life is simply to serve as a bad example.

    Comment


    • #3
      I always only see clutch side........I want both sides. I have been stocking up on crash parts after my last get off. I have an extra bar for the vortex clipons, footpeg for the rearsets, mirrors, tank , complete set of body work already painted, clutch and brake levers.

      Comment


      • #4
        no 1 makes the left side. only clutch side.

        graves is the only mfr. that makes a cover. other than that 1 w/ the clear window in europe anyway.

        yosh used to have em but ran out who knows when.

        NRC doesn't. factory pro does. woodcraft doesn't.
        AFM #715
        Suomy, Leo Vince Exhausts, Stompgrip, Sidi/Motonation, Lockhart Philips, Sonny Engineering, RK Racing Chains, AFAM

        Comment


        • #5
          Who makes one with a clear window ?
          I know www.tricktape.com make carbon covers that stick to the original.

          http://www.tricktape.com/product.asp?0=325&1=329&3=798

          Comment


          • #6
            it's the 1 lance (tlrman) is getting a group buy on i think

            here's 1 thread about it:
            http://www.tlplanet.com/forums/showt...&threadid=5543

            i dunno if i'd use it for the track cause it certainly won't pass tech if you decide to race later on. but the cool factor is there.

            cheapest you can get graves cover is from kneedraggers. there's no other place cheaper and i've looked everywhere. (kneedraggers is sellin it for lower than dealer cost)
            AFM #715
            Suomy, Leo Vince Exhausts, Stompgrip, Sidi/Motonation, Lockhart Philips, Sonny Engineering, RK Racing Chains, AFAM

            Comment


            • #7
              coo...thx for the info all

              2000 tillis plus stuff with some polished stuff and some carbon fiber stuff and a little bit of tlr stuff and some gsxr stuff

              CLICK HERE to donate a couple dollars/rubles/won/yen/euro/pounds/francs/etc to the greatest forum on the web!
              "Aerodynamics are for those who fail to make HORSEPOWER!"
              -Enzo Ferrari-

              Comment


              • #8
                heres what the yosh cover looks like

                Comment


                • #9
                  Originally posted by N2wheelies
                  heres what the yosh cover looks like
                  I have one of those.
                  TL1000R -99. Yellow/Black.
                  M4 Full system(Alu), K&N Filter, TRE mod, removed Pair valve. Yoshimura clutch cover, removed Scissor gears, Carbon fibre hugger, carbon fibre rearhugger, HammerIt TLR/R fairings, Gilles Toolings rearset. Pazzo racing levers, shorties, Íhlins rear, Brembo front brakes, ET79 undertail, blah blah blah...
                  ------------

                  Comment


                  • #10
                    wonder why they quit making those . looks like i will be going with the graves. at least i can get rid of the plastic one.

                    2000 tillis plus stuff with some polished stuff and some carbon fiber stuff and a little bit of tlr stuff and some gsxr stuff

                    CLICK HERE to donate a couple dollars/rubles/won/yen/euro/pounds/francs/etc to the greatest forum on the web!
                    "Aerodynamics are for those who fail to make HORSEPOWER!"
                    -Enzo Ferrari-

                    Comment


                    • #11
                      Graves is nice.. but you guys are stuck with a big logo on it whereas us smooth bastards got some without..
                      I've got a huge penis, You've got a huge penis, even Tim over there, yup you guessed it, huge penis. Good, now that that's out of the way, let's go ride

                      Comment


                      • #12
                        I just sold my graves should have sold it here but a buddy was hot for it. They cost as much as 190.00 but good luck finding one. You can get full price for a used one these days.
                        Lance Seattle, WA.
                        For the cool vids of me and my buddies:
                        www.exackley.com/myvids.htm

                        Comment


                        • #13
                          Graves is nice.. but you guys are stuck with a big logo on it whereas us smooth bastards got some without..
                          i kinda like it w/ the graves stamp on it. works w/ the yosh cover, why not the graves?
                          AFM #715
                          Suomy, Leo Vince Exhausts, Stompgrip, Sidi/Motonation, Lockhart Philips, Sonny Engineering, RK Racing Chains, AFAM

                          Comment

                          Working...
                          X