Announcement

Collapse
No announcement yet.

Market investigation; Who want's to have the coolest Suzuki gear indicator?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Market investigation; Who want's to have the coolest Suzuki gear indicator?

    .. well it's a preview so far but see what you think of it ;-) Fit's GSXR's (with electronic injection) and TLR / TLS.

    Go to;

    http://medlem.spray.se/tl1000r

    ...Roll on
    Twins are twice as fun

  • #2
    You know Im getting one.
    PCIIIUSB::CZ wheels::Akra f/s custom cans&hangers::Bitubo shock::GSXR750 K4 legs::R1 calipers::GSXR K2 rear caliper::ExtremeTech damper::Race rearsets::Joe V mod::K&N filter::Van's CCC+PP::Barnett springs::GiPro ATRE::1/5 throttle::C/F mirrors+hugger+fender+tankprotector::LP screen::mod subframe w/ gap tray::undertail::flush indicators::Van's rear cup::Brembo 19x18::Braided lines::Galfer wave rear rotor::Speedking mod OEM rotors::Van's ecc::WC clipons::520 @ 16/40::Van's spr cover::TWM cap::

    Comment


    • #3

      Comment


      • #4
        Originally posted by tlrcraz1
        View the movie - best i can do for now.. don't have a winner on the designcontest yet - and no box

        Close you eyes and imagine the rest
        Twins are twice as fun

        Comment


        • #5
          as long as the cost doesnt outweigh the and usefullness factor, i am definitely in

          rev bar indicator sounds sweet!!

          2000 tillis plus stuff with some polished stuff and some carbon fiber stuff and a little bit of tlr stuff and some gsxr stuff

          CLICK HERE to donate a couple dollars/rubles/won/yen/euro/pounds/francs/etc to the greatest forum on the web!
          "Aerodynamics are for those who fail to make HORSEPOWER!"
          -Enzo Ferrari-

          Comment


          • #6
            Absolutely. Of course, price contingent.

            Comment


            • #7
              Originally posted by kevh
              as long as the cost doesnt outweigh the and usefullness factor, i am definitely in

              rev bar indicator sounds sweet!!
              Ok sounds fair.. It will not have a rev-light but the next porject will be a speed-tacho thing.

              PGM'able Revlight, Speed recalibrator, logger port etc.

              But thats a future work..

              Twins are twice as fun

              Comment


              • #8
                Hope the project works out, FWIW to you make sure you clamp the input to the filter/ADC ( avoids SCR latchup ), that 33uF capy is pretty big you may find load dumping it a problem for the ECU if the input is not rugged enough. One of the better readouts i have seen on was made from billit aluminium.
                8mil spacing...12 mil track, are you going to use 2oz Copper?...i do.
                Good Luck.

                Comment


                • #9
                  Originally posted by TLRYellow
                  Hope the project works out, FWIW to you make sure you clamp the input to the filter/ADC ( avoids SCR latchup ), that 33uF capy is pretty big you may find load dumping it a problem for the ECU if the input is not rugged enough. One of the better readouts i have seen on was made from billit aluminium.
                  8mil spacing...12 mil track, are you going to use 2oz Copper?...i do.
                  Good Luck.
                  um...thx tlryellow, i wasnt feeling stoopid enuff yet today...lol

                  dagaz, keep us updated. sounds like a cool addon for the tillis

                  2000 tillis plus stuff with some polished stuff and some carbon fiber stuff and a little bit of tlr stuff and some gsxr stuff

                  CLICK HERE to donate a couple dollars/rubles/won/yen/euro/pounds/francs/etc to the greatest forum on the web!
                  "Aerodynamics are for those who fail to make HORSEPOWER!"
                  -Enzo Ferrari-

                  Comment


                  • #10
                    Originally posted by TLRYellow
                    Hope the project works out, FWIW to you make sure you clamp the input to the filter/ADC ( avoids SCR latchup ), that 33uF capy is pretty big you may find load dumping it a problem for the ECU if the input is not rugged enough. One of the better readouts i have seen on was made from billit aluminium.
                    8mil spacing...12 mil track, are you going to use 2oz Copper?...i do.
                    Good Luck.
                    Thanx for your comments, always welcome. Some explaining why it's done the way it is:

                    Latchup is not an issue from the sensor input, clamping is taken care of inside..

                    The 33uF cap is simply pulled high by a 1K resistor on the ECU side. The reson why it's 33uF is that the current generator pump is fed trough a 7.5kHz PWM, that gives a maximum ripple seen by the ECU of approx 12mV. Don't worry it will not break anything.

                    Ohh.. in Europe we have copperthickness in 'um'.. The PCB's will be ordered with 35um does that equals to 2oz?

                    Thanks!

                    Twins are twice as fun

                    Comment


                    • #11
                      Originally posted by kevh
                      um...thx tlryellow, i wasnt feeling stoopid enuff yet today...lol

                      dagaz, keep us updated. sounds like a cool addon for the tillis
                      Yep i will have the page updated when things happens and hopefully some nice pictures awell. I'am going to order stuff & PCB's missing on tuesday for the first two proto's.

                      With a bit of luck I will have something running next weekend. Atleast in a mokup in the box.

                      Twins are twice as fun

                      Comment


                      • #12
                        spell check your webpage just to make it appear more professional...good luck with your projects
                        Jack DeAndrade
                        Bad Karma Racing

                        Comment


                        • #13
                          Wow

                          I feel really stupid after reading all of that. The display looks awesome though. What is the estimated price gonna be? Ya gotta have a ballpark figure?

                          Comment


                          • #14
                            TLRYellow,

                            Welcome

                            Comment


                            • #15
                              welcome
                              looks cool, keep us posted

                              -

                              Comment

                              Working...
                              X