Announcement

Collapse
No announcement yet.

TLR vs. TLS Cans

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • TLR vs. TLS Cans

    I am going to do the "inexpensive" sound improvement (baffle removal and will probably powder coat them as well )upgrade and was wondering if the cans on the S and R are the same. I am looking through eBay at the moment for this purchase



    Thanks,

    RJ
    Galfer braided lines throughout, ATRE, UFO tailight, ET79 Undertail and Hugger, 520 16/39 Gold Chain combo, Full Yosh C/F exhuast, Corbin seat, Ohlins Steering Damper, Ohlins Rear Suspension, Tinted Double Bubble Windscreen, Sylvania Superwhites, Yosh Box Remapped and all protected by GORILLA Alarm System

  • #2
    Yosh cans swap, so I imagine the stockers would too.

    Comment


    • #3
      if you are looking for a set of tls cans, i have them CHEAP (since they weight a ton shipping might be a little pricey though)

      2000 tillis plus stuff with some polished stuff and some carbon fiber stuff and a little bit of tlr stuff and some gsxr stuff

      CLICK HERE to donate a couple dollars/rubles/won/yen/euro/pounds/francs/etc to the greatest forum on the web!
      "Aerodynamics are for those who fail to make HORSEPOWER!"
      -Enzo Ferrari-

      Comment


      • #4
        I've got some as well ...
        If trees could scream, would we be so cavalier about cutting them down? We might, if they screamed all the time, for no good reason.

        Comment


        • #5
          The inlet flange is the same, the mounting bracket that's welded to the sleeve is not the same.

          Comment


          • #6
            Kev... how much? I may be interested in taking them off your hands.. you don't by chance have the whole setup, do you?

            Comment


            • #7
              He has an R model

              I have a brand new set of stockers - please buy them before I put them in a dumpster
              TLOTM:
              May 2003
              August 2004

              Comment


              • #8
                and no the R/S mounting points are totally different
                TLOTM:
                May 2003
                August 2004

                Comment


                • #9
                  Originally posted by rzarobbie
                  Kev... how much? I may be interested in taking them off your hands.. you don't by chance have the whole setup, do you?
                  robbie, sent you a pm

                  2000 tillis plus stuff with some polished stuff and some carbon fiber stuff and a little bit of tlr stuff and some gsxr stuff

                  CLICK HERE to donate a couple dollars/rubles/won/yen/euro/pounds/francs/etc to the greatest forum on the web!
                  "Aerodynamics are for those who fail to make HORSEPOWER!"
                  -Enzo Ferrari-

                  Comment


                  • #10
                    I got 3 stock cans (2 left 1 right) and 2 Wileyco cans. But dont think its any ide to ship what ever you want over?
                    Its better to burn out then faid away!

                    Comment


                    • #11
                      [i]Sportbike: 99 TL1000S. Íhlins, Kevlar coated brake lines, PCII, Ride-adjuster, Akropovitch
                      [/B]
                      Akropovitch is spelt Akrapovic' just a note i noticed on your profile.

                      annyway,, here are my stock can's, end baffle removed and powered coated black. I added the Akrapovic' stickers which the pipes fool more than 9 out of ten people who think they know anything about pipes.. They sound awesome.. just ask doc .. total cost about 50-75 bucks.

                      2000 Race only TLR - Accel. Tech built GSXR1K forks w/triple, calipers/pads - Braking Wave Rotors - Full M4 (carbon) - Ohlins damper - Ohlins rear - pirelli tires - Graves fairing stay - Race tail complete with sub-frame - PCII - BMC filter - full Air box mod - Body Double race bodywork - GSXR1K front fender - Galfer/Goodridge lines - Woodcraft rearsets - complete - Woodcraft 50mm clip-ons - Complete front and rear brake levers w/ pazzo short levers red - Tre-Mod + Mod

                      Comment


                      • #12
                        nice pod dude


                        by the way...nice job with the cans....i coulda saved so many $$$
                        "Sorry Officer ! I thought you wanted to race"

                        Comment


                        • #13
                          lol...nice pillion

                          2000 tillis plus stuff with some polished stuff and some carbon fiber stuff and a little bit of tlr stuff and some gsxr stuff

                          CLICK HERE to donate a couple dollars/rubles/won/yen/euro/pounds/francs/etc to the greatest forum on the web!
                          "Aerodynamics are for those who fail to make HORSEPOWER!"
                          -Enzo Ferrari-

                          Comment


                          • #14
                            here are more "sans" baby !

                            2000 Race only TLR - Accel. Tech built GSXR1K forks w/triple, calipers/pads - Braking Wave Rotors - Full M4 (carbon) - Ohlins damper - Ohlins rear - pirelli tires - Graves fairing stay - Race tail complete with sub-frame - PCII - BMC filter - full Air box mod - Body Double race bodywork - GSXR1K front fender - Galfer/Goodridge lines - Woodcraft rearsets - complete - Woodcraft 50mm clip-ons - Complete front and rear brake levers w/ pazzo short levers red - Tre-Mod + Mod

                            Comment


                            • #15
                              is that kawi green i see in the background? BUSTED...

                              at least on the tlr they didnt use the big round cans like on the tls. i dont think you would fool too many people if you gave some tls cans your "akro" treatment

                              2000 tillis plus stuff with some polished stuff and some carbon fiber stuff and a little bit of tlr stuff and some gsxr stuff

                              CLICK HERE to donate a couple dollars/rubles/won/yen/euro/pounds/francs/etc to the greatest forum on the web!
                              "Aerodynamics are for those who fail to make HORSEPOWER!"
                              -Enzo Ferrari-

                              Comment

                              Working...
                              X