Announcement
Collapse
No announcement yet.
Sent my White Rims off to the Powder Coater
Collapse
X
-
Sent my White Rims off to the Powder Coater
Sent my white rims off to be powdercoated black I should have them back in a few weeks. I cant wait to see them and they will look hot !03 Honda RC51
99 Suzuki TL1000R Track Bike
WSMC #642
AK Composite Race Plastics, Yoshimura Full Race RS3 Exaust, Ohlins Rear Shock, Cable Clutch Conversion, Attack Racing Rearsets, PCII, Custom Map, Dyno Tuned by L&L Motorsports, BMC, Ivan's TRE, 5 Angle Valve Job, Pair Valve mod, Air Box Lid Removed, Ferodo CP911 Brake pads, Galfer steel braided lines all around, Powdercoated Rims, quick release Tank pins, LP Carbon Fibre Tripple clamp cover, LP Carbon Sliders, Dunlop 208 A's, Custom Paintjob by Apex Moto
http://toyride.org
Tags: None -
How much? What did you have to do to prep them? Were they local?2003 Blue and White TL1000R (The faster colors) Yoshimura Ti Cans, TRE, Custom Homemade Fender Eliminator, Hammerit Carbon Look Intake Covers, PC II, Fan Switch Mod. Yellow Box, Nissin Brake Caliper and Goodridge SS Brake Lines.
They say that only the good die young, so I plan on living forevever.
#1 STUNT FORUM SUPPORTER
Comment
-
Originally posted by Jokertlr
How much? What did you have to do to prep them? Were they local?- If you find this site useful kick us a few bucks. <a href="http://www.tlplanet.com/forums/billspaypal.php"><b><font color="blue">Tip cup</font></b></a>
- Want to help support the Planet? <a href="http://www.tlplanet.com/forums/payments.php"><b><font color="blue">Subscribe</font></b></a>Comment
-
ha same here on my 02 TLR.. but i'm also going to polish the lip after its done.. nice black rims with a hint of polish on the outside.. nice and low maintainance.. but still sweet....2000 Race only TLR - Accel. Tech built GSXR1K forks w/triple, calipers/pads - Braking Wave Rotors - Full M4 (carbon) - Ohlins damper - Ohlins rear - pirelli tires - Graves fairing stay - Race tail complete with sub-frame - PCII - BMC filter - full Air box mod - Body Double race bodywork - GSXR1K front fender - Galfer/Goodridge lines - Woodcraft rearsets - complete - Woodcraft 50mm clip-ons - Complete front and rear brake levers w/ pazzo short levers red - Tre-Mod + ModComment
-
Gloss Powdercoat for me....
But I cannot afford to send them off for a couple weeks cause that would make me lose my mind not being able to ride.
Gonna have to wait until winter.Galfer braided lines throughout, ATRE, UFO tailight, ET79 Undertail and Hugger, 520 16/39 Gold Chain combo, Full Yosh C/F exhuast, Corbin seat, Ohlins Steering Damper, Ohlins Rear Suspension, Tinted Double Bubble Windscreen, Sylvania Superwhites, Yosh Box Remapped and all protected by GORILLA Alarm SystemComment
-
Originally posted by dsly1
ha same here on my 02 TLR.. but i'm also going to polish the lip after its done.. nice black rims with a hint of polish on the outside.. nice and low maintainance.. but still sweet....Everyone dies but not everyone livesComment
-
Originally posted by Stabber
If you are going to do that you should polish the lips first and tape that part of the wheel off before powdercoating it. If you dont you will be doing this for days
That is a little too Bling Bling for me I dont want to get laughed at when I go to the track!03 Honda RC51
99 Suzuki TL1000R Track Bike
WSMC #642
AK Composite Race Plastics, Yoshimura Full Race RS3 Exaust, Ohlins Rear Shock, Cable Clutch Conversion, Attack Racing Rearsets, PCII, Custom Map, Dyno Tuned by L&L Motorsports, BMC, Ivan's TRE, 5 Angle Valve Job, Pair Valve mod, Air Box Lid Removed, Ferodo CP911 Brake pads, Galfer steel braided lines all around, Powdercoated Rims, quick release Tank pins, LP Carbon Fibre Tripple clamp cover, LP Carbon Sliders, Dunlop 208 A's, Custom Paintjob by Apex Moto
http://toyride.org
Comment
Comment