Announcement

Collapse
No announcement yet.

rear break rotor package

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • rear break rotor package

    First, I love TLzone Hope it come back soon.

    A thought came to me, I know I will get rid all of those stock rear rotors.torque arms.calipers. bolts. I gonna do something for my many tillers.

    I extremely care about weight.
    Tiller rear caliper including pads approx 1050g. Rear rotor 993g(while Gixxer rear rotor 801g).Caliper hanger and torque arm are NOT heavy but kinda ugly& old.

    Pls compare to those specs below:
    Address 125 one-piston front caliper with pads 630g.
    Special ordered semi-floating rear rotor 589g, basic form from gixxer.
    Special ordered CNC caliper hanger(torque arm no more needed)

    So, for those of you who knows the quality matters most, and I also know price matters most, I start to do something for tillers and tillises.

    Aiming at a 1 kilogram weight lost,I will come up with some pixs.
    Anybody interest? Pending price?

    Pls let me know.
    Last edited by dio50; 10-05-2010, 09:41 AM.

    MSN: [email protected]

  • #2
    Re: rear break rotor package

    Interested here. I'd like on one that uses the factory mounting locations, but is lighter and purdier.
    You do not talk about Fight Club....

    Comment


    • #3
      Re: rear break rotor package

      Originally posted by Suprachrgd82 View Post
      Interested here. I'd like on one that uses the factory mounting locations, but is lighter and purdier.
      hard to make it prettier with that nasty torque ARM hanging their. That said, I might be in if van decides not to do his hanger again, but if he does I am going that route as I have been begging him for months.
      Mike Rock
      NESBA #506 '98 TLR
      American cycle performance MRP motorsports

      Comment


      • #4
        Re: rear break rotor package

        Its a PACKAGE including a very high quality and a light-weight fully floating rear rotor heat treated, a single-pot oem small caliper and anodized CNC hanger, two wire-security stainless bolts. .

        These aint be expensive, I am trying my best.

        The next project is a rider's front seat made with thick aluminum sheet and 4 pieces of stiff foams, for tiller only.

        Any suggestion would be appreciated.

        MSN: [email protected]

        Comment


        • #5
          Re: rear break rotor package

          Need pics please, yes am interested.

          Comment


          • #6
            Re: rear break rotor package

            Rich

            "insert snazzy sig here"
            sigpic

            Comment


            • #7
              Re: rear break rotor package

              i might be in

              Comment


              • #8
                Re: rear break rotor package

                Id be interested depending on how it comes out & $$..


                .
                :

                Comment


                • #9
                  Re: rear break rotor package

                  Pics!!!

                  Comment


                  • #10
                    Re: rear break rotor package

                    Originally posted by dio50 View Post
                    Its a PACKAGE including a very high quality and a light-weight fully floating rear rotor heat treated, a single-pot oem small caliper and anodized CNC hanger, two wire-security stainless bolts. .

                    These aint be expensive, I am trying my best.

                    The next project is a rider's front seat made with thick aluminum sheet and 4 pieces of stiff foams, for tiller only.

                    Any suggestion would be appreciated.
                    High quality from Taiwan = does not make any sense. What grade aluminum for the hanger?

                    BTW, this is the Planet.
                    sigpic



                    BBOTM January 2011

                    Comment


                    • #11
                      Re: rear break rotor package

                      Originally posted by racrboy View Post
                      High quality from Taiwan = does not make any sense. What grade aluminum for the hanger?.
                      ?

                      Comment


                      • #12
                        Re: rear break rotor package

                        Let the vendor speak.
                        sigpic



                        BBOTM January 2011

                        Comment

                        Working...
                        X