Tweet
This sale will include the sheet metal pan ONLY. Once received one must be mechanically inclined enough to affix the piece to the sub-frame with your choice of fastener. I suggest you also purchase some Velcro material for help in securing the ECU; it will also aid in some vibration isolation. The part must be gently finessed into position to avoid scratching the sub-frame excessively. I assure you it will go in there, with little effort, so just take your time. Once you have it in there, shift it until it matches up, clamp it in place and mark your holes. The trunk release cable is passed through the hole provided, the connector with the boot slips over the feature in the floor, and the rectifier bolts in the provided holes. Take your time and reference the pictures in THIS thread. The (10) holes provided are sized to clear #8 screws. I chose to use #8-18 x 0.375" self tapping pan head screws; subframe drilled with a #29 drill (0.136")
Currently I have 5 left. If these sell out, there will be a 1-2 week lead time.
Price: $65 + (3% for paypal fee's) + shipping = Your price.
PayPal: [email protected]
Shipping follows time zones.
EST: $15
CST: $18
PST:$20
Please PM me with your details.
Clearance with Hotbodies undertail...
Currently I have 5 left. If these sell out, there will be a 1-2 week lead time.
Price: $65 + (3% for paypal fee's) + shipping = Your price.
PayPal: [email protected]
Shipping follows time zones.
EST: $15
CST: $18
PST:$20
Please PM me with your details.
Clearance with Hotbodies undertail...
Comment