Tweet
Now that I've finished the four headlight conversion,my original projector setup is on offer.
It has a pair of Ebay hi/lo projectors ala Alex4danatls' headlight mod plus a PIAA driving light.
Includes looms for the PIAA and the projectors plus 2x 50w ballasts.
The projectors are for the Left Hand Drive market,which means the higher part of the low beam is to the right.I have never had a problem with it as I rotated the projectors in the assembly to keep it out of the eyes of oncoming drivers.
This is my first go at a clear lens mod so it isn't quite as good as the most recent one ,but I think it is at least as good as most.
In the pics you can see the black polypropylene housing is a little distorted from heating a little too much when separating.You can't see it at all when mounted,but I thought I would mention it.
I am only looking to almost cover the price of the parts required to build-it cost me over $400 US to make so I'm asking US $400 + post.
All the labour and miscellaneous stuff like paint and adhesives come free
Both projectors have been replaced with new ones as I must have assembled with something in one of them and it marked the reflector.
Bulbs are 6000°K and white angel eyes
Post to the US is $104 with tracking
Express courier $165
UK $145
post to most of Aus A$25
Perth A$39
So if you don't have the time,inclination or tools to build your own,buy mine for what it would cost to make!
It has a pair of Ebay hi/lo projectors ala Alex4danatls' headlight mod plus a PIAA driving light.
Includes looms for the PIAA and the projectors plus 2x 50w ballasts.
The projectors are for the Left Hand Drive market,which means the higher part of the low beam is to the right.I have never had a problem with it as I rotated the projectors in the assembly to keep it out of the eyes of oncoming drivers.
This is my first go at a clear lens mod so it isn't quite as good as the most recent one ,but I think it is at least as good as most.
In the pics you can see the black polypropylene housing is a little distorted from heating a little too much when separating.You can't see it at all when mounted,but I thought I would mention it.
I am only looking to almost cover the price of the parts required to build-it cost me over $400 US to make so I'm asking US $400 + post.
All the labour and miscellaneous stuff like paint and adhesives come free
Both projectors have been replaced with new ones as I must have assembled with something in one of them and it marked the reflector.
Bulbs are 6000°K and white angel eyes
Post to the US is $104 with tracking
Express courier $165
UK $145
post to most of Aus A$25
Perth A$39
So if you don't have the time,inclination or tools to build your own,buy mine for what it would cost to make!
Comment